Landscape Architects - Page 4

X2 控制器兼容 Hunter 遥控器(不包含)。SmartPort® 接线束(所有 Hunter 遥控器均包含)能快速轻松地用于 Hunter 控制中。Hunter 遥控器使您无需奔波在控制器之间即可运行系统。

要安装 SmartPort 接头

Chinese, Simplified

Mit der Funktion CLIK-VERZÖGERUNG kann die Anzahl der Tage eingestellt werden, in denen die Bewässerung abgeschaltet bleibt, nachdem ein aktivierter Sensor die Bewässerung wieder freigegeben hat.


Regulating pressure saves water and extends the life of the irrigation system. Water savings is achieved by operating each zone at the best pressure for that equipment and application type. Accu-Sync ensures that every zone in every system stays in check for maximum water savings and longevity.


  • Solenoid Adapter PN (253500)



Das X2 Steuergerät ist mit Hunter-Fernbedienungen kompatibel (nicht enthalten). Der SmartPort® Kabelbaum (im Lieferumfang aller Hunter-Fernbedienungen enthalten) ermöglicht eine schnelle und einfache Installation der Fernbedienungen an Hunter Steuergeräte. Mit Hunter-Fernbedienungen kann man das System bedienen, ohne zum Steuergerät gehen zu müssen.

So installieren Sie den SmartPort


After setting up an ACC2 or ICC2 controller in your Centralus account, you may choose to release the controller (serial number) to another user. This will require the controller's deletion. When the NEW user adds the controller into the Centralus software, they will immediately choose the desired programming (software or field). Learn more


The water stream's trajectory and spray height leaving a sprinkler nozzle is important information when designing and installing irrigation systems. The chart below will show the total feet of height when using the largest nozzle for the ST-1600 and ST-1700 models.



The CUSTOM IMAGE feature allows the user to add an image from their existing phone library or the option to take a new one. This is a useful tool when you have multiple controllers/stations on-site to identify locations.

NOTE: The app version 5.0.1869 or later is required to access this feature.


The EZ-DT is a handheld, battery-operated device used for field diagnostics and troubleshooting with EZ Decoder Systems. Innovative wireless communication from the EZ-DT to EZ-1 decoders permits fault detection in the field without removing the decoders from the two-wire path. Quickly and easily retrieve a decoder's status, station address, current draw, and voltage on the two-wire path. EZ-DT can also be used to program station addresses into EZ-1 decoders via the red and blue wired connection to the decoder.


Native plant restoration projects and subsurface drip irrigation systems often require temporary overhead watering to support delicate plants. To simplify temporary irrigation, two preassembled stake kits are available for use with high-efficiency MP Rotator nozzles.