Hunter ST-243636-B composite vault and four–piece polymer–concrete cover set with cast–in openings to support rotor lateral thrust plus cast-in opening with circular covers for quick coupler and on–off–auto access
Synthetic turf or running track material attached to vault rim and cover set (optional)
2" x 4" (5 cm x 10 cm) tack/glue board or as per specification of all sides
Finished grade set to field perimeter track/glue board or as per specification
Hunter ST-V30-KV ultra low loss 3" (80 mm) valve kit with grooved fitting connections
Remote on–off–auto selector and solenoid manifold assembly mounted on vault sidewall
Color-coded control tubing from ST-V30-KV valve to selector switch mounted on vault side wall
Lead wires from solenoid to waterproof splice connectors
Hunter STBVF30K isolation valve and fitting kit with grooved connections and 500 PSI (35 bar; 3,500 kPa) rated couplings sufficient to connect rotor and control valve to manifold inlet
Hunter STSPTK adjustable manifold support block adjusted to support manifold weight (2)
16" x 16" x 2" (40 cm x 40 cm x 5 cm) support pad or concrete stepping stone as per specification (2)
Hunter HQ5RC quick coupling valve set directly below circular quick–access port
1" (25 mm) minimum Schedule 80 quick coupler supply piping and fittings or as per specification
⅝" x 48" (15 mm x 122 cm) rebar stake with stainless steel strapping
Compacted base field materials per specification
Brass manual ball valve included/provided with #9 ST-VBF30-K
Provide drainage via access to field drainage system
Waterproof connections per specifications between control wire and solenoid lead wires
Top of quick coupler set less than 1/ 2" (13 mm) below underside of main vault cover to allow key activation from above
Hunter ST-IBS-1600 rubber cover and infill barrier kit with trim reference rings to allow heights from standard 11/4" (32 mm infill application) to flat (non–infill or track material) applications
Hunter ST-BKT-1600 rotor hanger and elevation adjustment bracket
Hunter ST-1600-HS-B rotor
Isolation butterfly valve with grooved connections included; provided with #9 ST-VBF30-K
Wrap flexible inlet piping with heavy–duty plastic pipe wrap tape prior to backfill and compaction
