X-Core Support

X-Core Setting Event Day(s) Off

The X-Core allows you to program a No Water Day(s). This feature is useful to inhibit watering on specific day(s). For example, if you always mow the lawn on Saturdays, you would designate Saturday as a No Water Day so that you are not mowing wet grass.

Step 1

Turn the dial to the WATER DAYS position.

Step 2

Enter an interval watering schedule as described on Selecting Interval Watering.

Step 3

Press the arrow (>) button to scroll to the No Water Days at the bottom of the display. MO will be flashing. Use the arrow (>) button until the cursor is at the day of the week you wish to set as a No Water Day.

Step 4

Press the minus (-) button to set this day as a no water day. The icon will illuminate over this day. Repeat steps 4 and 5 until all desired event day(s) are off.

Rate this Article: 

¿Te resultó útil este artículo? | No