The wired Hunter Rain-Clik can be ran up to 200 feet from the controller.
Once the Rain-Clik is mounted, run the wire to the controller, and fasten it every few feet with wire clips or staples for best results. View the wired Rain-Clik installation instructions for further details. If an extension to the wire provided is needed, use the following table to determine the minimum wire gauge needed:
Rain-Clik Lead Wire Extension
||Minimum wire gauge
|25 to 50 ft.
|50 to 100 ft.
|100 to 200 ft.
Important: This unit is designed to be installed in conjunction with 24VAC circuits only. Do not use with 110 or 220VAC circuits. Use the MINI-CLIK-HV for high voltage applications.