Support
X-Core Support

X-Core Components

LCD Display (both Indoor & Outdoor Models)

X-Core Components LCD Display

  1. Run Times: Allows user to set each valve station run time from 1 minute to 4 hours
  2. Start Times: Allows 1 to 4 start times to be set in each program
  3. Station Number: Indicates currently selected station number
  4. Program Designator: Identifies program (A, B, or C) in use
  5. Day of the Week: Identifies day of the week
  6. Interval Watering: Identifies month when programming current date
  7. Odd/Even Watering: Identifies if Odd or Even watering has been selected
  8. Flashing Sprinkler: Indicates that watering is taking place
  9. System Off: Allows user to discontinue all programs and watering. Also allows the user to set the programmable “rain off,” which stops watering for a period from 1 to 7 days.
  10. Umbrella: Identifies if odd or even watering days are selected
  11. Seasonal Adjustment: Allows the user to make run time changes according to the seasons without reprogramming the controller. Bars on the left allow quick visual reference to the seasonal adjustment percentage. When using Solar Sync ET Sensor, will display seasonal adjust updated daily by sensor.
  12. Rain Drop: Indicates watering will occur on the selected day
  13. Crossed Rain Drop: Indicates the watering will NOT occur on the selected day
  14. Calendar: Indicates interval watering schedule has been programmed. Icon also appears when programming the current day

 

Control Buttons and Switches (both Models indoor & outdoor)

X-Core Components Control Buttons Switches

  1. Increases the selected flashing display
  2. Decreases the selected flashing display
  3. Returns selected flashing display to the previous item
  4. Advances the selected flashing display to the next item, also use to start a manual cycle
  5. Selects programs A, B, and C; also to start a test program

 

Control Dial (both Models indoor & outdoor)

X-Core Components Control Dial

Run: Normal dial position for all controller automatic and manual operation

Current Time/DayCurrent Time/Day: Allows current day and clock time to be set

Start Times  Start Times: Allows 1 to 4 start times to be set in each program

Run Times  Run Times: Allows user to set each valve station run time from 1 minute to 4 hours

Current Time/DayWater Days: Allows the user to select interval days to water

Seasonal Adjustment  Seasonal Adjustment: Allows user to make run time changes according to the seasons without reprogramming the controller - Bars on the left allow quick visual reference to the seasonal adjustment percentage

Manual-One Station  Manual-One Station: Allows user to activate a one-time watering of a single valve

System Off  System Off: Allows user to discontinue all programs and watering. Also allows the user to set the programmable “rain off,” which stops watering for a period from 1 to 7 days

SOLAR SYNC Settings: Allows user to program settings when using Solar Sync ET Sensor NEW!

 

Wiring Compartment

X-Core Components Wiring Compartment

  1. REM: Allows for connection of Hunter SmartPort® and Hunter Remote Controls NEW!
  2. Lithium Battery: The replaceable lithium battery (included) allows the controller to be programmed in the absence of AC power. In addition, the battery will provide power for backup timekeeping in the event of a power outage.
  3. Terminal Strip: Use to attach transformer, sensor, and valve wires from their source to the controller
  4. Reset Button: Use to reset the controller (located on side of controller)
  5. Sensor Bypass Switch: Ignores “Clik” weather sensor input when in Bypass position
  6. Internal Junction Box: Junction box in outdoor models for making AC power connections
  7. Terminal block for -E (International models only)
  8. External Transformer (Indoor Model Only): A plug in transformer is provided to supply AC power to the controller
Rate this Article: 
4

Was this article helpful? | No