X2 Support

X2 - Manually Run a Single Station

Step 1

Turn dial to the MANUAL  position.

Step 2

The station run time will flash in the display. Use the arrow (>) button to move to the desired station. You may use the plus (+) or minus (-) button to select the amount of time for a station to water.  The time can be set from 0:01(1 minute) to 6:00 (6 hours).

Step 3

Turn the dial clockwise to the RUN position to run the station (only the designated station will water, then the controller will return to automatic mode with no change to the previously set program). 

Rate this Article: 

¿Te resultó útil este artículo? | No