Support
X2 Support

X2 - Wand Err Codes

Tabs

Read Article

Here is a list of the error codes and ways to troubleshoot them:

X2 - Controller code CODE description SOLUTION
FAIL The provisioning failed Re-provision the device
donE
The previous operation is complete
N/A
bAd/SSID/OR/PASS/CodE​ The AP was not found or the password is incorrect Check the spelling of the SSID and/or password
rouTer/CONNECT/FAIL​ Cannot connect to the AP Check that AP is available.
Cloud/CONNECT/FAIL​​ Can’t connect to Hydrawise Server down or Certificate is bad
OFF/LINE WAND was connected to the AP, but the Wi-Fi connection went away. Check AP/Internet
ONLINE Connected to Hydrawise Server N/A
PUSH/SIdE/Button​ Press the button to begin provisioning Press the button [1|2|3] times to select the desired provisioning method
H xxx WAND Firmware Version Number N/A
C xxx X2 Controller Firmware Version Number N/A

 

Rate this Article: 
0

Was this article helpful? | No