Professionnels de l'arrosage agréés - Page 26

For Hunter drip irrigation systems we recommend regulation and filtration systems on all residential and commercial applications. For drip irrigation systems using BTT, we recommend using Hunter HFR-075-25 or HFR-075-40. These filters install directly on 3/4" hose thread and BTT installs on the end of the filter system for filtration and regulated PSI of 25 or 40.

Metric

For drip irrigation systems using BTT, we recommend using regulation and filtration systems on all residential and commercial applications. Filters shall install directly on BTT's 3/4" hose thread outlet and connect to drip tubing providing regulated PSI.

Find a Hunter Distributor closest to you using our interactive lookup.  Get Hunter

Use the chart below for ordering reference.

USA

Choose from the links below for troubleshooting your BTT controller.

USA

The Accu-Sync compares the pressure on the top side of the diaphragm (main water supply pressure) to the downstream pressure.  Pressure is adjusted by the unit forcing the diaphragm downward until the desired pressure is achieved.  The Accu-Sync automatically adjusts to main water supply pressure changes.  To properly set the dynamic pressure (running pressure) on the lateral line with Accu-Sync installed, we recommend doing so using our MP Guage on the last head of the line.  You can purchase a Hunter MP Gauge Assembly (shown below at farthest head) to accurately check the pressure. See i

USA

FloGuard Technology supplements the robust, field-proven features and benefits of the Hunter Pro-Spray® family with an additional level of water savings. When the nozzle is removed from the head of a Pro-Spray model with FloGuard, a single 10' tall indicator stream will clearly signal the need for maintenance, and flow will be reduced to less than 0.5 GPM. FloGuard is available in pressure-regulated Pro-Spray models with check valve (factory-installed option only). Additionally, the spacer in the directional flush plug allows for full system flushing, even with the FloGuard feature. 

USA

The HPC face panel quickly and easily upgrades Pro-C® controllers (PC400 models manufactured since March 2014) to next-generation smart controllers via the Hydrawise platform.

It also allows end users and contractors to manually operate their systems using a Hunter remote and/or smart device to turn on a single zone or program. 

There is no need to remove the smart port adapter from the Pro-C controller during the upgrade. The ultra-durable Hunter remote units provide contractors and homeowners with simple, remote-operated manual operation capabilities in the field.

USA

With the Pro-C controller in production for 17 years, we have continueously made upgrades to accommadate the innovative features.  Below you will find every panel we manufactured for the Pro-C model including the NEW wifi replacement front panel.

For information on replacing the front panel, click here.

Hunter makes our products and replacement parts available through our network of authorized distributors. 

USA

Selecting Specific Days of the Week to Water

USA

Owner’s manual, installation, and programming instructions for Wireless Valve Controller and Programmer is available in a downloadable PDF format.

USA

We would prefer that you use a Hunter valve with a Hunter DC latching solenoid, but we realize that sometimes you may be retrofitting existing systems that have another manufacturer’s valves. We have done testing on the following solenoids and have found these to operate with the Hunter SVC, WVC, NODE and XC Hybrid battery powered controllers. (some of these DC latching solenoids required a reduced system pressure, below 150 PSI (10.34 bars/1034.25 kPa), to ensure proper operation):

USA

Pages