Valves currently watering will be shut off after the dial is turned to the SYSTEM OFF position for two seconds. All active programs are discontinued and watering is stopped. To return controller to normal automatic operation, simply return dial to the RUN position.
- Turn the dial to the MANUAL position.
- Station run time will flash in the display. Use the button to move to the desired station. You may then use the and buttons to select the amount of time for a station to water.
- Turn the dial to the RUN position to run the station (only the designated station will water, then controller will return to automatic mode with no change in the previously set program). When the station is running you will see a flashing on the display.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.