X2 - Test Program

The X2 allows the user a simplified method for running a test program. This feature operates each station in numerical sequence, from the lowest to the highest. You can start with any station. This is a great feature to check the operation of your irrigation system.

To initiate the test program:

  1. With the dial in the RUN position, press and hold the PRG button. The station number will be displayed and the time will be flashing.
  2. Quickly use the plus (+) or minus (-) buttons to set the run time from 1 to 15 minutes. The run time needs to be entered only once.
  3. After a 2 second pause, the test program will begin and run every zone with this same run time.

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support