- Hunter ST-243636-B composite vault and four–piece polymer–concrete cover set with cast–in openings to support rotor lateral thrust plus cast-in opening with circular covers for quick coupler and on–off–auto access
- Synthetic turf or running track material attached to vault rim and cover set (optional)
- 2" x 4" (5 cm x 10 cm) tack/glue board or as per specification of all sides
- Finished grade set to field perimeter track/glue board or as per specification
- Hunter ST-V30-KV ultra low loss 3" (80 mm) valve kit with grooved fitting connections
- Remote on–off–auto selector and solenoid manifold assembly mounted on vault sidewall
- Color-coded control tubing from ST-V30-KV valve to selector switch mounted on vault side wall
- Lead wires from solenoid to waterproof splice connectors
- Hunter STBVF30K isolation valve and fitting kit with grooved connections and 500 PSI (35 bar; 3,500 kPa) rated couplings sufficient to connect rotor and control valve to manifold inlet
- Hunter STSPTK adjustable manifold support block adjusted to support manifold weight (2)
- 16" x 16" x 2" (40 cm x 40 cm x 5 cm) support pad or concrete stepping stone as per specification (2)
- Hunter HQ5RC quick coupling valve set directly below circular quick–access port
- Hunter STH30K 3" (80 mm) stainless steel flexible inlet pipe
- 1" (25 mm) minimum Schedule 80 quick coupler supply piping and fittings or as per specification
- ⅝" x 48" (15 mm x 122 cm) rebar stake with stainless steel strapping
- Compacted base field materials per specification
- Brass manual ball valve included/provided with #9 ST-VBF30-K
- Provide drainage via access to field drainage system
- Waterproof connections per specifications between control wire and solenoid lead wires
- Top of quick coupler set less than 1/ 2" (13 mm) below underside of main vault cover to allow key activation from above
- Hunter ST-IBS-1600 rubber cover and infill barrier kit with trim reference rings to allow heights from standard 11/4" (32 mm infill application) to flat (non–infill or track material) applications
- Hunter ST-BKT-1600 rotor hanger and elevation adjustment bracket
- Hunter ST-1600-HS-B rotor
- Isolation butterfly valve with grooved connections included; provided with #9 ST-VBF30-K
- Wrap flexible inlet piping with heavy–duty plastic pipe wrap tape prior to backfill and compaction
Ainda precisa de ajuda? Conte conosco.
Conte-nos que tipo de ajuda você precisa para encontrarmos a melhor solução para você.