NODE-BT - Controller Settings

Controller Settings offers more advanced features that can be accessed using the steps below.

  1. Open the Node-BT App and choose a controller Name.
  2. Select Connect.
  3. Select the More hamburger icon.
  4. Select Controller Settings.    

Customize Controller: Enter the nickname, map the location, and add an image. Confirm and Save.

Create a Passcode: Select Add Passcode to protect your device. Confirm and Save. To restore to default settings, visit the support page. Learn More

Language Preferences: The app will automatically recognize your smartphone's language preferences, and if available, the app will translate.           

System
FeatureDescription
SystemSelect the System toggle to shut down controller.
Solar PoweredToggle on if using a Solar panel.
Sensors
FeatureDescription
Soil SensorToggle on/off and make adjustments using a Hunter Soil sensor. Set the desired level of irrigation shutdown by scrolling from 0 (very dry) to 100 (very wet). Confirm and Save. The current moisture level will automatically appear. You can refresh it by swiping down on the screen.  The soil sensor must be wired and installed.
Rain SensorTurn On to suspend automatic irrigation. Rain or Clik sensor required.  See link here for more sensor CLIK sensor options.
Programs
FeatureDescription
ProgramsNaming the progams and stations can be very helpful when you need a better referecne for location (e.g. Front Lawn, Back Drip, etc.).
Stations
FeatureDescription
StationsAbility to name a station.
Cycle & SoakThe Cycle and Soak feature allows you to split a station’s runtime into shorter watering periods. The shorter watering periods will help prevent run off in situations like slopes or tight soils. It is recommended that the Cycle time is less than the station’s watering time, and the Soak time for the water to be absorbed. The total number of cycles is determined by taking the total programmed station run time and dividing it by the Cycle time.  Turn on in the Station settings. Input the amount of time the station shall run and pause. Confirm and Save.
Advanced Settings
FeatureDescriptions
Suspend WateringYou can SUSPEND (turn off) your system for any period of time for winterization purposes or for a basic system shutdown.
Seasonal AdjustmentSeasonal Adjustment is used to make global run time changes without re-programming the entire controller. Quickly adjusts run times from 10% to 300% global or by month. Confirm and Save.
Delay Between StationsThis feature allows the user to select a time delay between the end of one station run time and the start of another station's run time. The delay can be set for 10 seconds up to 4 hours. The delay is a convenient feature when working with slow closing valves or slow well water recovery.  Confirm and Save.
Pump/Master ValveTurn On to assign Station 1 to use as a pump or master valve for all programs. Station 1 will no longer be used for irrigation. Requires multi-station NODE-BT and normally closed master valve.
Manual Run TimeSet a custom run time from 1 minute to 12 hours. Save and Confirm.
Last Battery Change DateSelect the date the battery was last changed.
Battery Change ReminderSelect the month as a reminder to change the battery.
Actions
FeatureDescription
Remove ControllerRemove the controller from your controller list. Yo must rescan to appear in the controller list.
Factory ResetRestores controller back to factory defaults. Enter passcode if set. Confirm.

По-прежнему нужна помощь? Мы к вашим услугам!

Изложите свой вопрос, и мы постараемся найти для вас оптимальное решение.

Запрос в службу поддержки