Contractors

When using Centralus Software, you have the ability to change your STATION, BLOCK, and/or DELAY RUN TIMES. There is a maximum run time of 12:00 hrs for all model A2C controllers.  The minimum run time is 15 seconds for the decoder model and 1 second for the conventional model. In addition to setting the basic run time, you can Edit Run Times for Multiple Events (Station, Block, or Delay), and View Total Run Time for the program from your mobile device or PC.

 

USA

Your ICR Transmitter comes from the factory with the maximum number of stations set to 9. This means that when you use the UP or DOWN buttons to change the station, you may change it to any number between 1 and 9. However, if you have controllers with more than 9 stations, you will want to increase the stations' maximum number.

The ICR is designed to operate with two groups of Hunter controllers:

USA

Your ROAM Transmitter comes from the factory with the maximum station number set to 15. This means that when you use the UP and DOWN buttons to change the station, you may change it to any number between 1 and 240. However, if you only have a 6-station controller, you will never need to access stations 7 through 9. Likewise, perhaps you will own a Hunter controller like the HCC which can have more than 9 stations. In this case, you would want to access the stations above 9.

Maximum station count per controller model:

USA

When using a ROAM, ROAM-XL, ICR, or SRR remote, you may come across a controller that gives you an ERR or SP ERR message. There are two reasons that would cause one of these messages.

  1. Miswired Smartport
  2. Wrong Station Count on Transmitter
USA

When using the side strip nozzles, there are several different configurations that can be done with any given design. For this reason, we do not publish a PRECIPITATION RATE for these models. We would recommend using the TOTAL AREA METHOD to calculate your rate. 

USA

The BTT controller retrieves the local date and time from the smartphone it is paired with and updates every time a smartphone device is connected. The date and time for the controller can only be changed via smartphone settings. You can test by setting a start time a few minutes after the time displayed on the smartphone. 

USA

It most cases, when using your mobile device, it is easier to navigate when a bookmark is added to your home screen. Please view the steps below for both the iPhone or Android mobile devices.

USA

Heavy-duty Hunter Swing Joints (HSJ) are available in a range of inlet, outlet, size, and length configurations for any irrigation system. Pair them one-for-one with any Hunter golf rotor purchase to extend the golf rotor warranty from three to five years. HSJs are an ideal complement to commercial I-Series rotors as well.  The following topics are discussed in the article below:

USA

Pages