Support
HCC Support

HCC - Wiring Your Controller

Tabs

Read Article
Earth Ground Connection (Lightning Protection)

  1. Insert copper wire from earth ground hardware, and tighten screw in front.
  2. Minimum 10 AWG (5mm2) wire to earth ground hardware.
  3. Add copper-clad steel ground rods and/or plates sufficient to achieve 10Ω or less resistance at a minimum 8' (2.5 m) away from controller.
120V Wiring

  Transformer Wire     Power Source  
1 Brown 230V (Not Used) - - -
2 Black 120V Hot 5 Black 120V Hot
3 Blue Neutral 6 White Neutral
4 Green Ground 7 Green Ground

 

230V Wiring

  Transformer Wire     Power Source  
1 Black (Not Used) - - -
2 Brown 230V Hot 5 Brown 230V Hot
3 Blue Neutral 6 Blue or White Neutral
4 Green Ground 7 Green Ground

 

Rate this Article: 

Was this article helpful? Yes | No