Pro-C Support

Pro-C - Set Pump/Master Valve Operation


The master valve/pump start can be set ON or OFF by station, regardless of which program the station is assigned.

The default is for all stations to have the master valve/pump start circuit ON.

To program pump operation:

  1. Turn the dial to the PUMP position.
  2. Press the    and   buttons to toggle the master valve/pump start ON or OFF for the specific station.
  3. Press the   button to advance to the next station.
  4. Repeat steps 2 and 3 for all necessary stations.

Rate this Article: 

Was this article helpful? Yes | No