Support
Pro-C Support

Pro-c - Setting Odd/Even Day Watering

Tabs

Read Article
Setting Odd/Even Day Watering

This feature uses numbered day(s) of the month for watering instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days: 2nd, 4th, 6th, etc.)

  1. When you want to program ODD or EVEN days to water, press the   button until you see the https://www.hunterindustries.com/sites/default/files/x-core_Setting-Days-To-Water_day_on_icon.pngicon or https://www.hunterindustries.com/sites/default/files/x-core_Setting-Days-To-Water_day_off_icon1.pngicon flashing above "SUN".
  2. Press the    button once, ODD will flash on the display. The controller is now set to water on ODD Days.
  3. If you want to water on EVEN days, press the   button once. EVEN will flash on the display. The controller is now set to water on EVEN Days. You can move back and forth between ODD and EVEN by pressing the   button.
  4. Once ODD or EVEN day watering is chosen, turn the dial back to the RUN position to set watering days.

NOTE: The 31st of any month and February 29th are always "OFF" days if ODD watering is selected.

Older Pro-c Instructions

On the older Pro-C controller (green buttons) set the ODD or EVEN using the following instructions:

  1. Press the    button until you see a flashing number on the upper left of display with the word interval below.  Press the   button to set the number to "1".
  2. To set EVEN days to water, press the    button until the ODD flashes, then press the   button once. You will see a icon flashing above "ODD".  This indicates an interval of 1 day with NO ODD Day watering. The controller will water every EVEN day.
  3. To set ODD days to water, press the    button until the EVEN flashes, then press the   button once. You will see a icon flashing above "EVEN".  This indicates an interval of 1 day with NO EVEN Day watering. The controller will water every ODD day.
Rate this Article: 

Was this article helpful? Yes | No

Support Menu

S U P P O R T
M E N U