Support
X2 Support

X2™ CONTROLLER - Manual Operation

You can run an irrigation zone on demand from from your web browser or from your Hydrawise app.  For manual operation, read this article.

Please view the steps and screenshots to access this feature:

  1. From the home screen, click the REMOTE icon  at the bottom of the app.
  2. Select one of four options to manually water listed below from the top drop down.
    • Single Station – Allows you to manually start a single zone for the scheduled time or a time you manually change.
    • All Zones – Runs all zones for the normally scheduled time or a time you manually change.
    • Programs – Manually select either all or some zones to start.
    • Zone Tester and Winterization Tool – For contractor system testing and winterization.
Manual Single Zone

 

  1. Select the SINGLE ZONE option at the top dropdown.
  2. Select a ZONE from the list.
  3. Select the run time box and add the RUN TIME desired.
  4. Click START.
Manual All Zones

 

  1. Select the ALL ZONES option at the top dropdown.
  2. Select the run time box and add the RUN TIME desired.  Deselect a zone if you do not it to water. 
  3. Click START.

NOTE: Blue represents that zone will water and white represents that zone will not water.

Manual Program

 

  1. Select the PROGRAMS option at the top dropdown.
  2. Select a PROGRAM.
  3. Click START.
Zone Tester

 

  1. Select the ZONE TESTER option at the top dropdown.
  2. Select run time box and add the RUN TIME desired.
  3. Click START.
Rate this Article: 
0

Was this article helpful? Yes | No