The FLOW tab will display your real-time Current Flow as well as the Flow Totals (Daily, Weekly, Monthly, and Yearly). This feature easily allows you to manually set a single number (GPM) that is higher than the highest flow (GPM) zone on the system. Once a determination is made of the highest flow zone, you can set that number using the steps below. All FLOW configurations must be done in the Centralus software for the ICC2 Controller. A flow sensor must be installed for this feature to work in the software. Learn more
IMPORTANT: Existing WiFi modules with firmware 1.01 or higher can be updated over the air to version 2.08 to enable the flow capabilities. You will need to be onsite to manually reconnect to the local Wi-Fi network to complete the update.
Use the steps below to view FLOW data in the Centralus™ Irrigation Management Platform.
Sign in to your CENTRALUS ACCOUNT. From the CONTROLLER LIST tab, select an ICC2 Controller model.
Select the FLOW tab.
Select ADD SENSOR.
Select a FLOW SENSOR model from the drop-down list. Click SAVE. Selecting the OTHER option will allow you to input a KFACTOR and OFFSET for a custom flow sensor. Refer to manufacturer for these calibration numbers. Learn more
Select your HIGH FLOW SHUTDOWN. Choose your MAX FLOW RATE and DELAY FACTOR. Click SAVE.
The home FLOW screen will show any CURRENT FLOW occurring in the system.
After some flow is established, you can see historical water usage during a specified TIME PERIOD.