Support
Wireless Valve System Support

WVS - Manual Watering Operation

To activate a Manual Watering:
  1. With the current time/day showing in the display press and hold the  button to display the Manual Watering icon. The station number will also be displayed.
  2. Use the  button to navigate to the station that you would like to manually activate.
  3. Use the  or  button to adjust the manual water run time from 1 minute to 4 hours.
  4. Whilein the Manual Watering mode, squeeze and hold the Transmit/Receive button for 2 seconds to initiate the manual watering cycle.
  5. Repeat step 1 through 4 to manually activate additional stations.
To Suspend Manual Watering
  1. With the current time/day showing in the display, press and hold the  button to enter the manual off mode.
  2. Use the  button to navigate to the station you would like to turn off.
  3. While in the manual off mode, squeeze and hold the Transmit/Receive button for 2 seconds to deactivate the manual cycle for the station selected.
  4. Repeat steps 1 through 3 to turn off additional stations.
Rate this Article: 
0

Was this article helpful? نعم | No