|Hold – and turn to Start Times||Sets individual stations to ignore sensor shutdowns. Select stations with ◄ or ►, then use
+/– to change to Off to ignore the sensor.
|Cycle and Soak||Hold + and turn to Run Times; enter
Cycle and press PRG to set Soak
|Sets max time a station can run at once and minimum time it must wait before another
cycle. Divides run time into segments to prevent runoff.
|Hold – and turn to Run Times||Inserts a delay (seconds or minutes) between stations in a run time for slow valves or
|Hide Programs||Hold – and turn to Water Days||Use +/– to change from 4 to 1 to hide extra programs. 1 will show only Program A, start
time 1. 4 will show all programs (A, B, C) and 4 start times per program.
|Solar Sync Delay||Hold + and turn to Solar Sync||Sets number of days before the Solar Sync Sensor begins adjusting run times. Allows
landscape establishment for a set period of days before the sensor begins adjusting
|Clik Delay||Hold + and turn to Off||Set number of days for watering to remain off after sensor has been activated and
|Total Run Time||Turn to Run Times; press ◄ when station
1 is shown and PRG to select other
|Calculates and displays the total of all run times in a program start time.|
|Test Program||Hold PRG 3 seconds||Runs all stations in the controller for the time entered for test or diagnostic purposes.|
|Hold + and PRG to Save
Hold – and PRG to Restore
|Saves all program information to restore at a later time.|
|Total Reset||Press PRG and Reset button||Erases all watering information.|
|+, –, ◄, ► together, then +||Checks all stations for wiring problems.|
|Run Program||Hold ►, PRG to select||Runs all stations in selected program; use ► to advance to next station.|
|Hold + and turn to Start Times||Optional Seconds Mode allows for seconds of Run Time resolution, up to 5 minutes.
Press + and - buttons to toggle between Seconds and Minutes Modes.