The NODE allows the user a simplified method for running a test program. This feature will operate each station in numerical sequence, from lowest to the highest.
- Make sure the controller is in Idle Mode. Press and hold the button until the icon is displayed.
- The station number will be displayed in the lower left side of the display along with the run time.
- Quickly press the plus or minus buttons to set the duration of watering time for the test program. The controller will display a countdown and activate test program.
- To manually activate a program, press and hold the right arrow button until the icon is displayed, then quickly press the button. The program letter (A, B, or C) will show on the screen. If a different program is needed, quickly press the button until the desired program is displayed. The controller will display a countdown and activate desired program.
- To stop the Manual watering cycle press the minus button until the time is reduced to zero.
- Press the button to proceed to the next programming function or allow controller to return to idle mode.