Irrigation Technicians - Page 2

Use the CONTROLLER OFF feature to stop manual/automatic watering commands, set programmable days off (1-180 days), and set controller off.

USA

When using Centralus Software, you have the ability to change your STATION, BLOCK, and/or DELAY RUN TIMES. There is a maximum run time of 12:00 hrs for all model A2C controllers.  The minimum run time is 15 seconds for the decoder model and 1 second for the conventional model. In addition to setting the basic run time, you can Edit Run Times for Multiple Events (Station, Block, or Delay), and View Total Run Time for the program from your mobile device or PC.

 

USA

Your ICR Transmitter comes from the factory with the maximum number of stations set to 9. This means that when you use the UP or DOWN buttons to change the station, you may change it to any number between 1 and 9. However, if you have controllers with more than 9 stations, you will want to increase the stations' maximum number.

The ICR is designed to operate with two groups of Hunter controllers:

USA

Your ROAM Transmitter comes from the factory with the maximum station number set to 15. This means that when you use the UP and DOWN buttons to change the station, you may change it to any number between 1 and 240. However, if you only have a 6-station controller, you will never need to access stations 7 through 9. Likewise, perhaps you will own a Hunter controller like the HCC which can have more than 9 stations. In this case, you would want to access the stations above 9.

Maximum station count per controller model:

USA

When using a ROAM, ROAM-XL, ICR, or SRR remote, you may come across a controller that gives you an ERR or SP ERR message. There are two reasons that would cause one of these messages.

  1. Miswired Smartport
  2. Wrong Station Count on Transmitter
USA

When using the side strip nozzles, there are several different configurations that can be done with any given design. For this reason, we do not publish a PRECIPITATION RATE for these models. We would recommend using the TOTAL AREA METHOD to calculate your rate. 

USA

Native plant restoration projects and subsurface drip irrigation systems often require temporary overhead watering to support delicate plants. To simplify temporary irrigation, two preassembled stake kits are available for use with high-efficiency MP Rotator nozzles. 

 

USA

Pages