NODE-BT Support

Node-BT - Accessing and Replacing the battery


Step 1

Access the battery compartment by rotating counterclockwise until collar is removed.

Step 2

Insert two 9-volt alkaline batteries into the battery terminals. Observe and match the + position towards the inside of the controller.

Step 3

Remove the cap by pulling outward.  Use a flat head screwdriver in one of the side slots to pry if necessary.

Step 4

Secure the battery compartment by reinstalling the cap and rotating the collar clockwise until tightened.

Step 5

Test power to the NODE-BT by pressing the battery check button on the front of the controller. Observe and check for the illuminated green LED. If the LED is red, the battery needs a replacement.

Rate this Article: 

¿Te resultó útil este artículo? | No