Entidades de Gobierno - Page 14

Choose from the links below for troubleshooting your BTT controller.

USA

The Accu-Sync compares the pressure on the top side of the diaphragm (main water supply pressure) to the downstream pressure.  Pressure is adjusted by the unit forcing the diaphragm downward until the desired pressure is achieved.  The Accu-Sync automatically adjusts to main water supply pressure changes.  To properly set the dynamic pressure (running pressure) on the lateral line with Accu-Sync installed, we recommend doing so using our MP Guage on the last head of the line.  You can purchase a Hunter MP Gauge Assembly (shown below at farthest head) to accurately check the pressure. See i

USA

FloGuard technology supplements the robust, field-proven features and benefits of the Hunter Pro-Spray® family with an additional level of water savings. When the nozzle is removed from the head of a Pro-Spray model with FloGuard, a single 10' tall indicator stream will clearly signal the need for maintenance, and flow will be reduced to less than 0.5 GPM. FloGuard is available in pressure-regulated Pro-Spray models with check valve (factory-installed option only). Additionally, the spacer in the directional flush plug allows for full system flushing, even with the FloGuard feature. 

USA

With the Pro-C controller in production for 17 years, we have continueously made upgrades to accommadate the innovative features.  Below you will find every panel we manufactured for the Pro-C model including the NEW wifi replacement front panel.

For information on replacing the front panel, click here.

Hunter makes our products and replacement parts available through our network of authorized distributors. 

USA

Selecting Specific Days of the Week to Water

USA

Owner’s manual, installation, and programming instructions for Wireless Valve Controller and Programmer is available in a downloadable PDF format.

USA

We recommend that a qualified licensed contractor perform this type of winterization method. The blowout method utilizes an air compressor with a cubic foot per minute (CFM) rating of 80-100 for any mainline of 2" or less. The compressor is attached to the mainline via a quick coupler, hose bib, or other type connection, which is located beyond the backflow device. Compressed air should not be blown through any backflow or flow meter device. For additional winterization procedures, we highly recommend contacting the local dealer for the most common local practices.

USA

The ACC2 controller allows up to six Pump and/or Master Valve outputs to be assigned in the controller. This applies to the decoder and conventional models. In this article, the following topics are covered:

USA

About this event

ENTRENAMIENTO HUNTER SISTEMAS DE RIEGO BASICO

Ingrese al mundo del riego con el curso básico de diseño. Curso patrocinado por Hunter Industries para clientes que busquen profesionalizarse. 

Fundamentos para el diseño de un sistema de Riego

Conceptos: Caudal, presión, pluviometría

Diseño básico, paso a paso

Organizador: Emmsa Riego