Paisajistas

Here is a list of the error codes and ways to troubleshoot them:

USA

The Pro-C controller is supplied with a base 4-station module. The Pro-C is also compatible with the EZ Decoder System (EZDS) for hybrid conventional and two-wire operations. Add a Pro-C Decoder Module (PC-DM) to enable control for up to 32 total stations. This system uses the same EZ-1 decoders used with ICC2 and HCC controllers.

USA

When using the residential central Wi-Fi adapter with the I2C commercial controller, there are some common LED usage lights that will help you determine the communication.

 

USA

The NODE-BT controller offers an easy way to check the battery health of the actual controller without the use of a smartphone.

Press the physical BATTERY CHECK BUTTON on NODE-BT controller and the battery indicator LED flashes green or red.

4 green blinks = 100% - 76% Excellent

3 green blinks = 75% - 51% Good

2 green blinks = 50% - 31% Low

1 green blink = 30 – 20% Poor

1 red blink = 0% - 19% (Replace 9V alkaline batteries)

USA

 

 

 

Metric

Installing and maintaining an irrigation system is a complex task. That's why it's best to hire a qualified professional.

Get connected with a local authorized landscape professional.

Find A Contractor

Hunter is dedicated to connecting our customers with trusted irrigation professionals who are knowledgeable of our products and how to use them.

Find a Hunter Distributor near you.

USA

You can access reports for your controllers by selecting REPORTS at the bottom for the mobile version.  Use the settings on the report tab to the right of the screen to change the following:

  • Change the range of the report
  • Clear all report data
  • Refresh a report
  • View all report data

USA

In this section, you will be able to view and change configuration that includes controller settings, internet settings, regional settings, valve delays, and weather stations options.

To adjust the water triggers, follow the steps below:

USA

Hydrawise uses local, real-time weather forecasting and the most accurate weather stations
available to fine-tune your irrigation system to current conditions. Water triggers are the settings in your Hydrawise software that can be adjusted based on your watering requirements.  When a trigger met the adjusted threshold, it will make the change in the software to either adjust watering schedule or cancel watering.

To adjust the water triggers, follow the steps below:

USA

A Hunter MINI-CLIK®, FREEZE-CLIK®, or RAIN-CLIK™ sensor can be connected to your X2 controller.

USA

Pages