Municipios - Page 54

Odd or Even day watering schedules are available on all Hunter controllers.

USA

The Pro-C controller is truly modular in design. This means that most components of the controller can be removed and replaced if needed.

For the newer style Pro-C (blue panel and buttons) the part number for the front panel is 821501. The part number for the older style Pro-C controllers (green buttons) is 526200.

Find a Hunter Distributor closest to you using our interactive lookup -  Get Hunter

USA

All Hunter controllers will also allow you to program non-water days when utilizing Odd or Even mode.

Example:

If you mow the lawn on Saturday morning, you may not want the irrigation to come on that day. You can select even watering and Saturday as a non-water day. This way, the controller will water every even day but never on Saturday.

USA

Interval Watering is a feature that allows you to select the number of days to pass before the next watering day. For example, an interval of 3 will cycle the program once every three days and water on the third day. An interval of 1 is every day and an interval of 2 will water every other day. An interval can be set for any time period up to 31 days.

USA

A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time.

USA

All Hunter controllers come equipped with a reset procedure and/or reset button. The reset procedure allows the user to clear electrical glitches and help restore factory settings.

 

USA

To stop a station from running when the system cycles automatically, simply remove all station Run Times for station that you do not to operate. Make sure Programs A, B, C and on some controllers Program D, have a run time set to "0:00" for station that you do not to operate.

 

 

USA

 

Hunter controller's contain multiple sized transformers, therefore each controller has different activation capabilities. Here is a list of recommended applications when using multiple Hunter solenoids.

Note: The max stations you see below for each controller model are only if you have this number of HUNTER solenoids wired to a single screw terminal.  This cant be done through basic programming in the controller.

USA

There are two reasons why your sprinklers would continue running:

USA

Pages