Valve Installation: Proper use of Fittings and Wire Splices
This video shows you the steps needed to prepare and install Hunter valves. You will learn how to prepare fittings and how to splice wires.
Troubleshooting a Hunter Valve that is not Opening - Quick Tip
One of the most common reasons for a valve not to open when the controller sends low voltage electricity to the valve is because the exhaust port might
Programming Odd & Even Days and Programming Interval Watering
This video will teach you how to program your controller to water every other day by selecting odd or even days of the week to water. You will also
Manual Operation with a Hunter Controller
Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations
ICR Remote Control - Setting the Address
If you can activate your stations from your controller, but you can't activate them from your remote control, it is possible that your transmitter is
ICR Remote Control - Programming & Operation
This video provides an overview on how to set up and operate your ICR remote control including how to turn on and off stations as well as changing their
Hunter Irrigation Valves: Built to Stand the Test of Time
The Hunter family of irrigation valves offers durable, reliable performance and is engineered to stand the test of time, no matter the conditions
How to Reset a Hunter Controller
If want to clear the memory on your controller and start from fresh or if your controller is not responding to your commands, this video will show you
Display Troubleshooting on a Hunter Controller
If your display is blank, unreadable, or if it is showing symbols that do not make any sense, this video will teach you how to troubleshoot the display.
Controllers - Programming Multiple Programs Part 4 of 4: Other Modes
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 3 of 4: Program B
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 2 of 4: Program A
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 1 of 4: Introduction, Time/Date
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Cleaning the Diaphragm on a Hunter Valve - Quick Tip
One of the most common reasons for a valve to keep running continuously is the accumulation of debris in the diaphragm, which prevents the valve from
Canceling Extra Start Times on Hunter Controller
An irrigation system that is repeating the cycle and continuously watering most likely has too many start times programmed into the controller. This
Canceling a Delay on a Hunter Controller
One of the most common reasons for a sprinkler system to water intermittently and show the word DELAY on the display is because a delay time was
Valve Series: Valve Operation
This video will teach you the components and operation of an Hunter irrigation valve. You will learn how to manually open and close your Hunter valve
Contrôle du débit
Learn how to adjust water flow directly at the valve using the Flow Control adjustment feature. You can increase or decrease the flow of water for
Guide des électrovannes Hunter
Hunter's line of valves consists of an array of models that fit every application from residential to golf course applications. Watch to learn about
