Installatori

The P2C controller is supplied with a base 4-station module. The P2C is also compatible with the EZ Decoder System (EZDS) for hybrid conventional and two-wire operations. Add a Decoder Module (PC-DM) to enable control for up to 32 total stations. This system uses the same EZ-1 decoders used with ICC2 and HCC controllers.

USA

About this event

Hunter University presenta la Semana de la Innovación en Querétaro.
Panelistas: Rafael Rodriguez, Area Manager México, Cristian Simonetti, Área Manager Cono Sur.

Regístrate en https://hunter.info/YoConHunter

About this event

Hunter University les trae la Semana de la Innovación que se llevará a cabo en Mérida. Por los panelistas: Rafael Rodriguez, Area Manager México, Cristian Simonetti, Área Manager Cono Sur.

About this event

Proyectos Residenciales - Controladores

https://hunter.info/AprendoConHunter

16:00 - 17:00 P.M. - Mexico - Peru
18:00 - 19:00 P.M. - Chile
18:00 - 19:00 P.M. - Buenos Aires/Montevideo
18:00 - 19:00 P.M. - Uruguay

About this event

Proyectos Comerciales - Productos Mecánicos

https://hunter.info/AprendoConHunter

16:00 - 17:00 P.M. - Mexico - Peru
18:00 - 19:00 P.M. - Chile
18:00 - 19:00 P.M. - Buenos Aires/Montevideo
18:00 - 19:00 P.M. - Uruguay

A Hunter weather sensor or other micro-switch-type weather sensors can be connected to the Pro-C® Controller. The purpose of this sensor is to stop automatic watering when weather conditions dictate.

USA

Operating Specifications

  • Station Count: Conventional wiring from 4 to 23 stations,two-wire EZ Decoder System option up to 32 stations.
  • Station Run Time: 1 minute to 6 hours (optional Seconds Mode)
  • Start Times: 4 individual starts per program, three programs available (A, B, C)
  • Watering Schedule: 7-day calendar, interval watering up to a 31-day interval or true odd or even day programming


Electrical Specifications

USA

If a customer claims and purchases a subscription for an A2C-LTE device and no longer wants to have ownership of the device, there is the option to cancel the subscription. When a customer cancels a subscription, the plan status will change to CANCELING status until the end of the billing cycle.  The cellular service will remain active until the end of that cycle.  When the end of the cycle is reached, the plan status will change to DISABLED, and the Carrier status will change to DEACTIVATED.

USA

The Controller and Service ownership belongs to the customer who claims the device. Claiming begins as soon as the controller and Zipit account is set up in the Centralus Software. This is a one-to-one relationship with one customer per device only. Once a device is claimed by a customer, no other customer can access it. Purchasing additional data and/or taking any other actions can only be done by the customer. In some cases, the ownership will need to be transferred to a new customer.

USA

A valve with an external leak can be a simple adjustment or may require further inspection. Review our simple checklist below.

USA

Pages