Pubblico - Page 68

The most common reason for a valve to remain on, or weep, is debris. New installations without proper flushing, recent mainline repair, or well water can cause debris to flow into the valve and get caught between the diaphragm and the seat. 

USA

The WVP controller uses a numbered seven-day calendar to schedule the days to water. The display will show the days of the week as numbers 1–7.

When programming the current time and day, you can select a number to represent the current day of the week. The number can be changed to represent the user's preference. Many people use Sunday as day 1 while others use Monday as day 1. The day number can be set to whatever works best for you.

USA

The SVC controller uses a numbered seven-day calendar to schedule the days to water. The display will show the days of the week as numbers 1–7.

When programming the current time and day, you can select a number to represent the current day of the week. The number can be changed to represent the user's preference. Many people think of Sunday as day 1 while others think of Monday as day 1. The day number can be set to whatever works best for you.

USA

Easy Retrieve Program Memory

Easy Retrieve allows the user to save a program in the controller's memory for later use. The saved program can be retrieved at any time to overwrite unwanted changes in the current program. The saved program can then be used as a custom default restoration point.

USA

The Pro-C controller is equipped with a delay between stations function. This feature allows the user to select a time delay between the end of one station run time and the start of another station's run time. The delay can be as short as a one second or up to 4 hours. The delay is a convenient feature when working with slow closing valves or slow well water recovery.

USA

This feature allows the user to select a time delay between the end of one station run time and the start of another station's run time. The delay can be set for 1 second up to 4 hours. The delay is a convenient feature when working with slow closing valves or slow well water recovery.

USA

Step 1. Check the controller programming

  • Is there a watering Start Time programmed into the controller?
  • Is the Watering Start Time programmed with correct time of day (i.e. AM or PM)?
  • Is the Current Time set correctly (i.e. AM or PM)?
  • Is today a Water Day? (i.e. Controller may be set for Even Days and today is the 21st)
  • Is the controller set on Interval watering days?
  • Are there Station Run Times programmed into the controller?

Step 2. Check the controller operation

USA

 

Lock and Key sets for Hunter controllers can be purchased at a Hunter Authorized Distributor in your area.

PN387300 (spare part) Standard key set

PN387301 (spare part) Non-Standard key set

PN387302 (spare part) Non-Standard key set

Find a Hunter Distributor closest to you using our interactive lookup - Get Hunter

USA

If your controller shows irrigation running (Flashing Sprinkler Icon), and your sprinklers are not working, you may have a wiring problem at the valves or the irrigation water supply has been shut down.

If you have a master valve on your system (check for wire on the P/MV terminal), then your master valve may not be opening up. Check the wiring connections at the master valves for loose or corroded connections, or a bad solenoid.

USA

Pages