Voi e il vostro partner nel settore dell' arcitettura del paesaggio

A Hunter weather sensor or other micro-switch-type weather sensors can be connected to the Pro-C® Controller. The purpose of this sensor is to stop automatic watering when weather conditions dictate.

The Controller and Service ownership belongs to the customer who claims the device. Claiming begins as soon as the controller and Zipit account is set up in the Centralus Software. This is a one-to-one relationship with one customer per device only. Once a device is claimed by a customer, no other customer can access it. Purchasing additional data and/or taking any other actions can only be done by the customer. In some cases, the ownership will need to be transferred to a new customer.

The NO NETWORK CARD PRESENT message could appear on your Network Info screen if the module was removed, then reinstalled. Also, a zero could display for the IP number. Use the steps below to check your current connection status.

Once the CELLKIT is installed in an ICC2 Controller and powered on, it is ready for connection to the internet. If you need to check on your CONNECTION STATUS or set up your own SIM configuration, download the free CELLKIT App from the App Store or Google Play, then follow the steps below.

In this support section, you will find short troubleshooting tips and answers to frequently asked questions that will be helpful when using the A2C-LTE Module to enable cellular control with the ACC2 Controller. This FAQ list provided is intended to provide guidance on A2C-LTE Module setup and use in existing installations.

Correctly installing the Hunter SJ Swing Joint can solve many challenges for new and existing irrigation systems. Sprinklers may not be at the correct height or you may want to install taller heads in your system. SJ Swing Joints provide a quick and easy way to install sprinklers to their proper height and position. SJ Swing Joints have additional swivel ells on both ends for simple installation and maintenance in any configuration. This unique design allows for a vertical PVC connection for easier servicing in the future.

Please select from the following choices to assist you with your Wireless Min-Clik Sensor.

When designing and installing irrigation systems, the water stream's trajectory and spray height leaving a sprinkler nozzle is important information. The chart below will show the total feet of height when using the largest nozzle for the ST-1600 model.