Wykonawcy z branży nawadniania i oświetlenia - Page 23

Run Eco-Mat parallel to longest irrigated area length to ensure quick installation and to minimize fitting quantities. To calculate Eco-Mat row quantity for a specific area, divide the shorter side of the area by 26 inches (66 centimeters). The width of the Eco-Mat is 32 inches (80 centimeters), but we will overlap the product by about 6 inches (15 centimeters) in order to attain regular 14-inch (35 centimeter) lateral intervals.

Calculate the length of the runs by the quantity of rows to understand the total linear feet (meters) of product required.

USA
  1. Recommended Eco-Mat installation depth per plant type: Turf: 4-6 inches (10-15 centimeters), Perennials and groundcovers: 8 inches (20 centimeters), Shrubs: 12 inches (30 centimeters.
  2. Recommended to achieve 80-85 percent compaction rate of soil above and below mat.
  3. Recommended to scarify soil to a depth of 6 inches (15 centimeters) below mat installation.
  4. Slightly sandy soil (sandy loam) is ideal when using subsurface drip irrigation - follow recommendations provided by soils report.
USA

For Hunter drip irrigation systems we recommend regulation and filtration systems on all residential and commercial applications. For drip irrigation systems using BTT, we recommend using Hunter HFR-075-25 or HFR-075-40. These filters install directly on 3/4" hose thread and BTT installs on the end of the filter system for filtration and regulated PSI of 25 or 40.

Metric

For drip irrigation systems using BTT, we recommend using regulation and filtration systems on all residential and commercial applications. Filters shall install directly on BTT's 3/4" hose thread outlet and connect to drip tubing providing regulated PSI.

Find a Hunter Distributor closest to you using our interactive lookup.  Get Hunter

Use the chart below for ordering reference.

USA

Choose from the links below for troubleshooting your BTT controller.

USA

The Accu-Sync compares the pressure on the top side of the diaphragm (main water supply pressure) to the downstream pressure.  Pressure is adjusted by the unit forcing the diaphragm downward until the desired pressure is achieved.  The Accu-Sync automatically adjusts to main water supply pressure changes.  To properly set the dynamic pressure (running pressure) on the lateral line with Accu-Sync installed, we recommend doing so using our MP Guage on the last head of the line.  You can purchase a Hunter MP Gauge Assembly (shown below at farthest head) to accurately check the pressure. See i

USA

About this event

RSVP Required

March means college basketball madness and the start of the irrigation and lighting season with Hunter Industries and SiteOne. To celebrate, join us for an afternoon of Mexican food, drinks, and awesome prizes!

Attire: Rep your favorite team!

RSVP by March 15th, 2019. Attendance is limited to the first 40 participants.