Right-click on the video format below and select Save As...MOV | WMVPobierz

Category:

Product Lines:

Length:

Published: 
June 16, 2010

Solar Sync is a sensor system that, when connected to a Hunter controller, will automatically adjust your controller watering based upon changes in local climate conditions. The Solar-Sync utilizes a solar and temperature sensor to measure on-site weather conditions used to determine evapotranspiration (ET), or the rate at which plants and turf use water. In addition, the Solar-Sync sensor includes a Hunter Rain-Clik and Freeze-Clik sensor that will shut down your irrigation system when it rains and/or during freezing conditions. A small module connects the sensor to the controller and will automatically increase or decrease watering run times based on changes in weather.

Series
1 of 2

Programowanie czujnika Solar Sync

Next
Solar Sync - Programming - Part 1 of 2: Controller Setup

Products Featured

Więcej filmów firmy Hunter

Filmy Hunter są najlepszym źródłem wiedzy na temat produktów firmy Hunter. Znajdź wszystko od wsparcia po opisy cech i zalet produktów Hunter. Kliknij poniżej, aby rozpocząć.