Instaladores

The NODE-BT controller offers an easy way to check the battery health of the actual controller without the use of a smartphone.

Press the physical BATTERY CHECK BUTTON on NODE-BT controller and the battery indicator LED flashes green or red.

4 green blinks = 100% - 76% Excellent

3 green blinks = 75% - 51% Good

2 green blinks = 50% - 31% Low

1 green blink = 30 – 20% Poor

1 red blink = 0% - 19% (Replace 9V alkaline batteries)

USA
If the top of the screw is below the top of the turret, the screw must be turned counter-clockwise until it is flush with the top before removing the nozzle.
Metric

 

 

 

Metric

Register for an account online

If you have not done so already, we recommend creating an account using the Centralus login page.

The A2C controller uses two different types on communication devices, a WiFi module or a Local Area Network (LAN) connection. For more information on the connecting the A2C controller to the Centralus software, please follow the steps in the articles listed below.

USA

Here is a list of the error codes and ways to troubleshoot them:

Metric

The CLIK DELAY option is designed to set number of days for watering to remain off, after sensor has been activated and restored.

Metric

The X2 Controller is compatible with Hunter Remote Controls (not included). The SmartPort® wiring harness (included with all Hunter Remotes) allows for fast and easy use of the Hunter controls. The Hunter remotes make it possible for you to operate the system without having to walk back and forth to the controller.

To install the SmartPort connector

Metric

A Hunter CLIK sensor or closed circuit type weather sensors can be connected to the X2. The purpose of this sensor is to stop automatic watering when weather conditions dictate.

Metric

Pages