Prestadores de serviços de irrigação e iluminação - Page 24

For Hunter drip irrigation systems we recommend regulation and filtration systems on all residential and commercial applications. For drip irrigation systems using BTT, we recommend using Hunter HFR-075-25 or HFR-075-40. These filters install directly on 3/4" hose thread and BTT installs on the end of the filter system for filtration and regulated PSI of 25 or 40.

For drip irrigation systems using BTT, we recommend using regulation and filtration systems on all residential and commercial applications. Filters shall install directly on BTT's 3/4" hose thread outlet and connect to drip tubing providing regulated PSI.

Find a Hunter Distributor closest to you using our interactive lookup.  Get Hunter

Use the chart below for ordering reference.

Choose from the links below for troubleshooting your BTT controller.

Controller not appearing in app scan list or loses connection

Controller manual push button not responding

App indicates watering, but none is occurring

Automatic irrigation does not start at start time

Controller waters more than one time

The Accu-Sync compares the pressure on the top side of the diaphragm (main water supply pressure) to the downstream pressure.  Pressure is adjusted by the unit forcing the diaphragm downward until the desired pressure is achieved.  The Accu-Sync automatically adjusts to main water supply pressure changes.  To properly set the dynamic pressure (running pressure) on the lateral line with Accu-Sync installed, we recommend doing so using our MP Guage on the last head of the line.  You can purchase a Hunter MP Gauge Assembly (shown below at farthest head) to accurately check the pressure.