P2C - Manually Run a Single Station

  1. Turn the dial to the MANUAL position.
  2. The station run time will flash in the display. Use the → button to move to the desired station. You may then use the + and - buttons to select the amount of time for a station to water.
  3. Turn the dial to the RUN position to run the station. (Only the designated station will water, then the controller will return to automatic mode with no change in the previously set program.)

IMPORTANT: The Manual single-station function ignores any attached sensor and will allow watering to occur.

 

Hala yardıma ihtiyacın var mı? Buradayız.

Bize hangi konuda desteğe ihtiyacınız olduğunu söyleyin, biz de sizin için en iyi çözümü bulalım.

İletişim Desteği