Siz ve Peyzaj Mimarisi Sektöründeki Partneriniz

The NO NETWORK CARD PRESENT message could appear on your Network Info screen if the module was removed, then reinstalled. Also, a zero could display for the IP number. Use the steps below to check your current connection status.

USA

Once the CELLKIT is installed in an ICC2 Controller and powered on, it is ready for connection to the internet. If you need to check on your CONNECTION STATUS or set up your own SIM configuration, download the free CELLKIT App from the App Store or Google Play, then follow the steps below.

NOTE: If using the Cellular (Hunter Provided Sim), the CELLKIT app is not required for any type of setup.

USA

In this support section, you will find short troubleshooting tips and answers to frequently asked questions that will be helpful when using the A2C-LTE Module to enable cellular control with the ACC2 Controller. This FAQ list provided is intended to provide guidance on A2C-LTE Module setup and use in existing installations.

USA

Correctly installing the Hunter SJ Swing Joint can solve many challenges for new and existing irrigation systems. Sprinklers may not be at the correct height or you may want to install taller heads in your system. SJ Swing Joints provide a quick and easy way to install sprinklers to their proper height and position. SJ Swing Joints have additional swivel ells on both ends for simple installation and maintenance in any configuration. This unique design allows for a vertical PVC connection for easier servicing in the future.

USA

About this event

An industry mixer and overall good time for colleagues and friends for an annual cornhole tournament. Grab a partner and enjoy food and drinks!

For any questions or event details, please contact:

Nicke Straabe
Nick.Straabe@hunterindustries.com
(714) 292-8944

The water stream's trajectory and spray height leaving a sprinkler nozzle is important information when designing and installing irrigation systems. The chart below will show the total feet of height when using the largest nozzle for the ST-1600 and ST-1700 models.

 

USA

The EZ-DT is a handheld, battery-operated device used for field diagnostics and troubleshooting with EZ Decoder Systems. Innovative wireless communication from the EZ-DT to EZ-1 decoders permits fault detection in the field without removing the decoders from the two-wire path. Quickly and easily retrieve a decoder's status, station address, current draw, and voltage on the two-wire path. EZ-DT can also be used to program station addresses into EZ-1 decoders via the red and blue wired connection to the decoder.

USA

The MANAGE SUBSCRIPTIONS feature will allow you to access monthly service plan information on any ACC2 controller that is connected using the LTE cell module. For this setup, the LTE communication module (PN - A2C-LTE) is required for the ACC2 controller.

Find an authorized Hunter distributor near you using our interactive Distributor Lookup.

USA

The performance cards will assist you with performance data, rotor installation, nozzle installation, nozzle part numbers, and basic adjustment instructions. Choose from the documents listed below for your specific residential model.

USA

Pages