When taken out of the box, the Hunter ST-1600 Rotor will be able to make a complete 180-degree sweep in 80 seconds at 90 PSI (6.2 bar; 620 kPa). In this
Synthetic Turf Irrigation ST-1600-KIT Installation and Assembly
In this video, we’ll show you how to assemble and install a Hunter ST-1600 Synthetic Turf Irrigation Kit. This all-in-one irrigation system is designed
Hunter Synthetic Turf Irrigation ST-KIT Sports Field Site Study in Phoenix, Arizona
Irrigation professional Dick Roberts of DTR Landscape Development shares his thoughts on the Hunter ST-KIT system. Watch to see several new Hunter ST
Canceling Extra Start Times on Hunter Controller
An irrigation system that is repeating the cycle and continuously watering most likely has too many start times programmed into the controller. This
Programming Odd & Even Days and Programming Interval Watering
This video will teach you how to program your controller to water every other day by selecting odd or even days of the week to water. You will also
Canceling a Delay on a Hunter Controller
One of the most common reasons for a sprinkler system to water intermittently and show the word DELAY on the display is because a delay time was
How to Rest a Hunter Controller
If want to clear the memory on your controller and start from fresh or if your controller is not responding to your commands, this video will show you
Controllers - Programming Multiple Programs Part 4 of 4: Other Modes
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 3 of 4: Program B
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 2 of 4: Program A
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 1 of 4: Introduction, Time/Date
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
