When taken out of the box, the Hunter ST-1600 Rotor will be able to make a complete 180-degree sweep in 80 seconds at 90 PSI (6.2 bar; 620 kPa). In this
Locating Irrigation Wires and Valves with a Wire/Valve Locator
We’ll show how to set up a typical wire and valve locator, how to locate a valve, track and mark the wire location to aid in troubleshooting wiring
Locating Wiring & Connection Defects Using a Ground Fault Locator
Once you’ve determined that the controller and valve are working properly, you need to take a closer look at the wiring to determine where the problem
Grounding and Ground Testing for Irrigation Systems
In this video, we’ll cover typical grounding specifications; two-wire decoder system grounding; Hunter ICD decoder grounding; using the Dual-S surge
Multimeter Basics: Troubleshooting an irrigation system using a Multimeter
We’ll be going over the basic functions of a voltmeter and how you can use it in locating problems within your irrigation system. We’ll be talking about
Troubleshooting Irrigation Systems with a Pro50K or a Station Master Pro
When you are looking for a bad wire, testing a solenoid's health, or testing the power output from an irrigation controller, it is essential to have the
Synthetic Turf Irrigation ST-1600-KIT Installation and Assembly
In this video, we’ll show you how to assemble and install a Hunter ST-1600 Synthetic Turf Irrigation Kit. This all-in-one irrigation system is designed
Hunter Synthetic Turf Irrigation ST-KIT Sports Field Site Study in Phoenix, Arizona
Irrigation professional Dick Roberts of DTR Landscape Development shares his thoughts on the Hunter ST-KIT system. Watch to see several new Hunter ST
X2 WAND Wi-Fi Module Troubleshooting
In this video, we will show you how to troubleshoot your WAND Wi-Fi module to successfully connect your X2 controller to the internet.
X2 Irrigation Controller: Connecting to Wi-Fi
Connect your X2 controller to the internet using the WAND Wi-Fi module. 0:40 - WAND OVERVIEW AND BENEFITS. 1:10 - CHECKING YOUR WI-FI SIGNAL. 1:55 -
X2 Standalone Control vs WI-FI to Hydrawise with the WAND module
In this video, you will learn how X2 works as a standalone controller without Wi-Fi. You will also learn how the WAND Wi-Fi module gives X2 new
Clik-Delay Product Guide
The Hunter Clik-Delay was developed in response to the California Governor's mandate for a 48 hour irrigation delay after a rain event occurs. The Clik
Rain Sensors - FAQs
If your controller is showing a message indicating that the sensor is active even thought it has not rained or if the sensor is not shutting down the
Wireless Rain Clik - FAQs
If your wireless sensor is not shutting down irrigation when it rains or if the Sensor Status LED on the receiver continues to be red after the sensor
