Video Library | Hunter Industries

Displaying 1 - 23 of 23

Hunter ST-1600 Rotor Maintenance

When taken out of the box, the Hunter ST-1600 Rotor will be able to make a complete 180-degree sweep in 80 seconds at 90 PSI (6.2 bar; 620 kPa). In this

Locating Irrigation Wires and Valves with a Wire/Valve Locator

We’ll show how to set up a typical wire and valve locator, how to locate a valve, track and mark the wire location to aid in troubleshooting wiring

Locating Wiring & Connection Defects Using a Ground Fault Locator

Once you’ve determined that the controller and valve are working properly, you need to take a closer look at the wiring to determine where the problem

Grounding and Ground Testing for Irrigation Systems

In this video, we’ll cover typical grounding specifications; two-wire decoder system grounding; Hunter ICD decoder grounding; using the Dual-S surge

Multimeter Basics: Troubleshooting an irrigation system using a Multimeter

We’ll be going over the basic functions of a voltmeter and how you can use it in locating problems within your irrigation system. We’ll be talking about

Troubleshooting Irrigation Systems with a Pro50K or a Station Master Pro

When you are looking for a bad wire, testing a solenoid's health, or testing the power output from an irrigation controller, it is essential to have the

Synthetic Turf Irrigation ST-1600-KIT Installation and Assembly

In this video, we’ll show you how to assemble and install a Hunter ST-1600 Synthetic Turf Irrigation Kit. This all-in-one irrigation system is designed

Hunter Synthetic Turf Irrigation ST-KIT Sports Field Site Study in Phoenix, Arizona

Irrigation professional Dick Roberts of DTR Landscape Development shares his thoughts on the Hunter ST-KIT system. Watch to see several new Hunter ST

X2 WAND Wi-Fi Module Troubleshooting

In this video, we will show you how to troubleshoot your WAND Wi-Fi module to successfully connect your X2 controller to the internet.

X2 Irrigation Controller: Connecting to Wi-Fi

Connect your X2 controller to the internet using the WAND Wi-Fi module. 0:40 - WAND OVERVIEW AND BENEFITS. 1:10 - CHECKING YOUR WI-FI SIGNAL. 1:55 -

X2 Standalone Control vs WI-FI to Hydrawise with the WAND module

In this video, you will learn how X2 works as a standalone controller without Wi-Fi. You will also learn how the WAND Wi-Fi module gives X2 new

How to configure an ACC Ethernet connection (ACC-COM-LAN) on Hunter ACC Irrigation Controller

ACC-COM-LAN installs in the Hunter ACC controller, and allows it to communicate with IMMS central control software via an Ethernet network connection

ACC Advanced Programming: Decoders, Part 2: Sensors

Hunter Industries brings you DUAL, a two-wire decoder system to be used with the already popular I-Core controller at a breakthrough price point. In

ACC Advanced Programming: Decoders, Part 1

In this video, you'll learn how to set up and install decoders on an ACC commercial irrigation controller. The use of decoders with the ACC system

Solar Sync: Smart Control Made Simple

A brief overview of how the Hunter Solar Sync works to convert most AC powered irrigation controllers to smart control. Learn why the Solar Sync saves

Soil-Clik: Wiring Specific Controllers

Learn to wire your Soil-Clik moisture sensor with Hunter's Pro-C, X-Core, I-Core, and ACC irrigation controllers. Soil-Clik can also be installed on non