Right-click on the video format below and select Save As...MOV | WMVDownload

Category:

Product Lines:

Length:

Published: 
March 31, 2020

In this short video, you will learn how to hide programs on your X2 controller.

The X2 is factory configured with 3 independent programs (A, B, C with four start times each) for different plant type requirements. For simplification, you can customize the X2 to display only the required programs. To simplify programming, you can hide programs that are not required and show 1 program, Program A, and 1 start time.

With the dial in the RUN position, hold the – MINUS button while you turn the dial to the Water Days position. To hide extra programs, use the plus and minus buttons to change from 4 to 1. 1 will show only program A with a single start time. 4 will show all programs and start times.

CARACTERISTIQUES PRODUIT

PLUS DE VIDEOS PAR HUNTER

Les vidéos de Hunter sont la meilleure manière de connaitre nos produits. Trouvez l'information dont vous avez besoin, de l'assistance produit jusqu'aux bénéfices et caractéristiques des produits Hunter. Cliquez ci-dessous pour commencer.