STG-900-KIT

The STG-900-KIT has been replaced by the ST-1600-KIT.
Application Synthetic Turf Sports Fields
Radius 103' to 120'
Flow 74.5 to 92.0 GPM
Year Discontinued 2024
Inlet Size 1½" Acme

Modelli

Filter

Filter

Inlet Size

Modello Descrizione Aggiungi a elenco
STG-900-83 Turbina per erba sintetica, pistone da 8 cm, regolabile da 40° a 360°, pistone in plastica, filettature di ingresso Acme da 1½" (40 mm), tecnologia Total-Top-Service, ugello 83 installato; da usare con STG-900-KIT +
ST-173026-B Accessorio per erba sintetica, pozzetto in materiale composito, foro prefabbricato per la turbina e foro per l'accesso rapido all'idrantino; da usare con STG-900-KIT +
ST-2008-VA Accessorio per erba sintetica, giunto snodato in PVC ad allineamento verticale, sette punti di snodo, ingresso femmina a scorrimento da 5 cm, uscita femmina Acme da 1½" (40 mm); da usare con STG-900-KIT +
ST-VBVF-K Accessorio per erba sintetica, raccordo Acme 1½" (40 mm) x NPT 1½" (40 mm), valvola ICV-151G, NPT 1½" (40 mm) x raccordo liscio 1½" (40 mm), collettore valvola a sfera 1½" (40 mm), raccordo liscio 1½" (40 mm) x Acme 1½" (40 mm); da usare con STG-900-KIT +
HQ-5-RC Idrantino HQ, ingresso femmina da 1" (25 mm), 1 slot, corpo in 1 pezzo; compatibile con la chiave HK-55, gomito per tubazioni HS-1 o HS-2 e coperchio giallo +
STG-900-KIT
STG-900-KIT
STG-900-KIT
Opzioni installate dall’utente

Contatta il tuo distributore locale per conoscere la disponibilità e ordinare i prodotti.

Caratteristiche tecniche

The STG-900-KIT was discontinued in 2024. The recommended replacement for the kit is the ST-1600-KIT, which offers a larger size for easier installation and servicing. It also provides comprehensive coverage of flow ranges as low as 23.3 to 236 GPM (88.2 to 893 l/min).

The obsoleted components included in the STG-900-KIT are listed below, and each is warrantied for five years from the manufacturing date code.  

STG-900-KIT components being obsoleted:

ST-173026-B Composite Vault

ST-2008-VA PVC Swing Joint

ST-VBVF-K Valves and Fittings

239800 Acme Elbow Fitting

Visit the ST-1600-KIT page for a list of components to order for replacement.

Operating Specifications

•    Radius: 103' to 120'
•    Flow: 74.5 to 92.0 GPM
•    Operating pressure range: 100 to 120 PSI
•    Precipitation rate: 1.25 in/hr approximately
•    Warranty period: 5 years for component parts


Caratteristiche

The Hunter STG-900-KIT is the first and only fully integrated irrigation solution for mall-to-midsize synthetic turf fields. This unique, cost-effective offering combines our legendary gear-driven rotor technology with a special multi-axis swing joint, low-pressure-loss valves, and feature-packed vault for reliable, long-term performance.

All irrigation components, including the swing joint point of connection, are accessible through the top for flexible and easy installation, servicing, and maintenance. This complete access also eliminates any need for excavation when restoring the field, saving a significant amount of time and money. Ordering is a snap too, thanks to the kit’s handy reference sheet that lists everything you need.

ST-900-KIT Components

FIGURECOMPONENTS TO ORDERQTYITEM DESCRIPTION
1STG-900-831Pop-up, top-serviceable, adjustable arc (40° to 360°), 1½" Acme inlet
2ST-173026-B1Composite vault, pre-cast hole for rotor and quick coupler
3ST-2008-VA1Vertical alignment PVC Swing Joint, seven pivot points, 2" female slip inlet, 1½" female Acme outlet
4ST-VBVF-K1ICV-151G Valve, manifold ball valve, 1½" Acme inlet, 1½" Acme outlet
523980011½" elbow, female Acme to male Acme, connects STG-900 Rotor to ST-VBVF-K
6473900SP1STG-900 Rubber Cover Kit
7HQ-5RC1Quick coupler, 1" NPT inlet, 1¼" outlet for key

Vantaggi principali

Flexible arc adjustment from 40° to 360° offers narrow-to-wide coverage
QuickCheck™ Arc Mechanism lets you verify the arc setting without waiting for the sprinkler to finish its rotation
Through-the-top arc adjustment allows you to easily set the arc at the sprinkler head
Water-lubricated gear drive delivers reliable operation without clogging
Factory-installed rubber logo cap increases athlete safety on the field
Nozzle trajectory: 22.5°


Funzioni avanzate

Designed for small to midsize synthetic turf field layouts, the kit’s STG-900 rotor offers a radius range up to 120'. Featuring a slightly larger exposed surface area, it includes through-the-top access to the riser assembly for easy maintenance. This versatile option can be installed in a vault system within the synthetic field or in the natural turf adjacent.

Traditional swing joints will cause the rotor to move back and forth as the elevation of the rotor is raised and lowered. While appropriate for natural turf installations, synthetic turf systems require a completely different approach. The best way to support the rotor's tremendous lateral thrust during operation is to place the rotor in a snug fitting hole within the vault's cover set. In order to set the rotor perfectly to grade and in this very specific location the swing joint must provide flexible movement in every direction, not only up and down, but also forward, backward, left and right. Ideally, this flexibility would include the ability to "reset" the elevation grade of the rotor should the enclosure settle downward during the vibratory compaction of the surrounding field base material. Enter the Hunter Vertical Alignment (VA) swing joint. Offering the ultimate in flexibility, our vertical alignment swing joint includes six pivot points for multi-axis movement plus a seventh pivot at the outlet for rotational adjustments of the valve and rotor assembly. Constructed of rugged 2"  PVC pipe and fittings, this 315 PSI rated swing joint dramatically reduces dangerous water velocities and performance robbing pressure loss through the ST System's components.

ST Accessories

The Hunter ST vault's complementary blend of features include construction grade fiberglass in the body, high impact polymer-concrete on the exposed upper rim and a near indestructible polymer-concrete cover set. Together, they form a 20,000+ lb. rated enclosure that is durable, yet easy to install at 105 lbs. with the covers removed.

The exclusive 2” thick three-piece polymer-concrete cover set has a perfectly located cast-in hole for the STG-900 rotor on one side. This design allows the rotor to be held perfectly to grade within the hole while the enclosure is back-filled from the exposed opposite side. Quick couplers are a must-have around every synthetic field. The cast-in quick coupler port and cover on the opposite side eliminates the need for separate quick coupler enclosures around the playing field.

Quick Coupler

All ST Vaults include convenient quick access ports. Quick-couplers provide a convenient source of water for washing down spills and water-soluble paint. Integrated in-vault design eliminates the need for additional quick-coupler enclosures.

 

 

Clear Advantage of the Hunter ST Vault

 

Have you ever tried to bore a hole into polymer-concrete? It is near impossible. How about installing and setting a 400 lb. polymer-concrete enclosure? Not very much fun.

We designed the ST vault to be as lightweight and easy to install as possible without sacrificing durability. From the functionality perspective, the three-piece cover, large interior space and total top access to all components make servicing easier and the system less expensive to maintain.

Sports Turf Irrigation System

For some, the preferred approach to designing synthetic turf irrigation systems is the "block" type configuration with remotely located valves that are off the synthetic surface. The benefit of this configuration is that it removes all high-pressure mainlines from beneath the synthetic surface. Through the use of a remotely located isolation valve, constantly pressurized supply lines to the quick couplers can be removed from beneath the synthetic surface as well.

For others, the preferred approach is to use valve-in-head (VIH) rotors. However, typical VIH rotors have an unacceptably high-pressure loss at the high flows and pressures that are inherent in all synthetic turf irrigation systems. As a result, the Hunter ST System utilizes a valve adjacent to head (VAH) configuration. This design lowers the pressure loss down to a very acceptable 3.9 PSI at 75 GPM through the valve assembly. 

Sports Turf Valve

Tabelle

 
STG-900 Nozzle Performance Data
Nozzle Pressure
PSI
Radius
ft.
Flow
GPM
Precip in/hr
73 
Orange
100 103 74.5 1.35 1.56
110 109 77 1.25 1.44
120 115 79.6 1.16 1.34
83 
Tan
100 112 84.2 1.29 1.49
110 116 88.1 1.26 1.46
120 120 92 1.23 1.42

Notes:
All precipitation rates calculated for 180 degree operation. For precipitation rate of 360 degree sprinkler divide by 2.
Requires minimum 100 PSI dynamic pressure supplied to swing joint inlet.

Documenti

  • Tutto
  • Istruzioni
  • Marketing
  • Caratteristiche tecniche
  • Dettagli CAD
  • Pezzi di ricambio
STG-900-KIT and STG-900-KIT-B Written Specification thumbnail
Nome
STG-900-KIT and STG-900-KIT-B Written Specification
Mostra tutti i documenti

Foto in studio

Image
ST-900-kit
ST-900-kit
Titolo:
STG-900
File:
STG-900-KIT-Vaul002.jpg
Classificazione:
Studio
Linea di prodotto:
Sistema ST
Keywords:
Pagina dell'immagine

Scaricare immagine

Medio Originale
Cliccando su download, si accettano i termini e le condizioni .

Dichiarazione per l'uso delle foto

Dichiarazione: è illegale riprodurre fotografie di Hunter o altro materiale protetto da copyright senza esplicita autorizzazione scritta da parte dell'azienda. In caso vengano utilizzate e/o riprodotte, le foto devono essere accompagnate dalla dicitura: "Foto per gentile concessione di Hunter Industries Incorporated." Le foto di Hunter non possono essere associate a copie, loghi o altri elementi grafici che rappresentano prodotti di altri produttori. Se si utilizzano le foto di Hunter per creare qualsiasi tipo di stampa o grafica oppure su un sito web, è necessario inviare una copia dell'uso previsto a creative@hunterindustries.com. Hunter deve approvare il progetto prima della produzione finale.

Tutte le immagini devono essere accompagnate dalla dicitura: "Foto per gentile concessione di Hunter Industries Incorporated." La dicitura deve apparire accanto alla foto.

Chiudere