Hunter Products Backed by a Guarantee
Hunter Industries Incorporated (“Hunter”) warrants the following products to be free of defects in materials or workmanship under normal use for a period of one (1) year from the original date of manufacture: SRM family and Micro Sprays. Hunter warrants the following products to be free of defects in materials or workmanship under normal use for a period of two (2) years from the original date of manufacture: PGP-ADJ®, PGJ, PS Ultra family, Spray Nozzles, PCN, PCB, AFB, PGV family, SRV, X-Core family, Pro-C family, ROAM, NODE, WVP, WVS, ACZ, PCZ, PSR, HCV, SJ, FLEXsg, HSBE family, RZWS, and ET System. Hunter warrants the following products to be free of defects in materials or workmanship under normal use for a period of three (3) years from the original date of manufacture: ROAM XL, MP Rotator family. Hunter warrants the following products to be free of defects in materials or workmanship under normal use for a period of five (5) years from the original date of manufacture: PGP Ultra family, I-20, I-25, I-35, I-40, I-60 and I-90 families, Pro-Spray® family, Pro- Spray® PRS30 family, and Pro-Spray® PRS40 family, I-Core/Dual family and ACC controller families, ICD Decoder Products, ICR Remotes, IMMS™ Central Control Products, “Clik” Sensors, Solar-Sync, HQ, ICV plastic, and IBV brass valves, ICZ and PLD tubing, Eco-Mat, ST System Rotors and Accessories. If used for agriculture applications, Hunter limits the warranty for its spray, rotator and rotor products to a period of one (1) year from original date of manufacture. This agriculture limitation supersedes all other warranties expressed or implied.
If a defect in a Hunter product is discovered during the applicable warranty period, Hunter will repair or replace, at its option, the product or the defective part. This warranty does not extend to repairs, adjustments, or replacement of a Hunter product or part that results from misuse, negligence, alteration, modification, tampering, or improper installation and/or maintenance of the product. This warranty extends only to the original installer of the Hunter product. If a defect arises in a Hunter product during the warranty period, contact your local Hunter Authorized Distributor.
Hunter’s warranty applies only to products installed as specified and used as intended for irrigation purposes. Hunter’s warranty shall be limited to defects in materials and workmanship during the warranty period, and shall not extend to situations in which the product was subjected to improper design, installation, operation, maintenance, application, abuse, improper electrical current, grounding, service other than by Hunter authorized agents, operating conditions other than that for which it was designed, or in systems using water containing corrosive chemicals, electrolytes, sand, dirt, silt, rust or agents that otherwise attack and degrade plastics. Hunter’s warranty does not cover component failures caused by lightning strikes, electrical power surges or unconditioned power supplies. If products are repurchased, the price to Distributor for such products in effect at the time of return will apply.
Hunter’s obligation to repair, replace or repurchase its products or product components as set forth above is the sole and exclusive warranty extended by Hunter. There are no other warranties, expressed or implied, including warranties of merchantability and warranties of fitness for a particular purpose. Hunter will not be liable to a distributor or to any other party in strict liability, tort, contract or any other manner for any damages caused or claimed to be caused as a result of any design of or defect in Hunter’s products, or for any special, incidental or consequential damages of any nature. Where applicable, Hunter’s statement of warranty complies with local directives.
Where applicable, Hunter’s statement of warranty complies with local directives.
If you have any questions concerning the warranty or its application, please email HunterTechnicalSupport@hunterindustries.com
ASAE Certification Statement
Hunter Industries Incorporated certifies that pressure, flow rate, and radius data for these products were determined and listed in accordance with ASAE Standard S398.1, Procedure for Sprinkler Testing and Performance Reporting, and are representative of performance of production sprinklers at the time of publication. Actual product performance may differ from the published specifications due to normal manufacturing variations and sample selection. All other specifications are solely the recommendation of Hunter Industries Incorporated.
Adobe Reader is required to view and print PDF files.
Download Adobe Reader here.