Designers - Page 15

FloGuard technology supplements the robust, field-proven features and benefits of the Hunter Pro-Spray® family with an additional level of water savings. When the nozzle is removed from the head of a Pro-Spray model with FloGuard, a single 10' tall indicator stream will clearly signal the need for maintenance, and flow will be reduced to less than 0.5 GPM. FloGuard is available in pressure-regulated Pro-Spray models with check valve (factory-installed option only). Additionally, the spacer in the directional flush plug allows for full system flushing, even with the FloGuard feature. 


The HPC face panel quickly and easily upgrades Pro-C® controllers (PC400 models manufactured since March 2014) to next-generation smart controllers via the Hydrawise platform.

It also allows end users and contractors to manually operate their systems using a Hunter remote and/or smart device to turn on a single zone or program. 

There is no need to remove the smart port adapter from the Pro-C controller during the upgrade. The ultra-durable Hunter remote units provide contractors and homeowners with simple, remote-operated manual operation capabilities in the field.


With the Pro-C controller in production for 17 years, we have continueously made upgrades to accommadate the innovative features.  Below you will find every panel we manufactured for the Pro-C model including the NEW wifi replacement front panel.

For information on replacing the front panel, click here.

Hunter makes our products and replacement parts available through our network of authorized distributors. 


Selecting Specific Days of the Week to Water


Owner’s manual, installation, and programming instructions for Wireless Valve Controller and Programmer is available in a downloadable PDF format.


We would prefer that you use a Hunter valve with a Hunter DC latching solenoid, but we realize that sometimes you may be retrofitting existing systems that have another manufacturer’s valves. We have done testing on the following solenoids and have found these to operate with the Hunter SVC, WVC, NODE and XC Hybrid battery powered controllers. (some of these DC latching solenoids required a reduced system pressure, below 150 PSI (10.34 bars/1034.25 kPa), to ensure proper operation):


Before securing the controller to the wall, you must first remove the lower wiring compartment door. The door can easily be removed by following the simple steps below:

  1. Open the external door using the included key if outdoor version model. Indoor version will have no external door.
  2. The lower wiring compartment door can now be removed by pushing downward. See illustration below:





We recommend that a qualified licensed contractor perform this type of winterization method. The blowout method utilizes an air compressor with a cubic foot per minute (CFM) rating of 80-100 for any mainline of 2" or less. The compressor is attached to the mainline via a quick coupler, hose bib, or other type connection, which is located beyond the backflow device. Compressed air should not be blown through any backflow or flow meter device. For additional winterization procedures, we highly recommend contacting the local dealer for the most common local practices.


Hunter warrants the Wireless Rain-Clik (WR-CLIK) and Wireless Solar Sync sensors (WSS-SEN) for 5 years. If a defect in a Hunter product is discovered during the applicable warranty period, Hunter will repair or replace, at its option, the product or the defective part. This warranty does not extend to repairs, adjustments, or replacement of a Hunter product or part that results from misuse, negligence, alteration, modification, tampering, or improper installation and/or maintenance of the product. This warranty extends only to the original installer of the Hunter product.


About this event

Venha conhecer o melhor controlador Wi-Fi do mercado - Controlador HC com Software Hydrawise da Hunter

Visite nossos stands: Kadox - Duro - Senninger 


Feira Internacional da Irrigação - Brasil 2017

Av. Guilherme Campos, 500

Jardim Santa Genebra


Anexo ao Parque D. Pedro Shopping


Exposição das 9h00 às 17h00 | Entrada Gratuita