White Horse Golf Course...
White Horse Golf Course...
product, location, Golf, rotor, Application, opposing nozzle, g80b
Download Image
800x533 (72dpi) 106 KB
4992x3328 (300dpi) 12 MB
By clicking download, you agree to our terms and conditions


Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: Photo courtesy of Hunter Industries Incorporated.

Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers’ products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you need to send a copy of your intended use to 
Hunter must approve the design prior to final production.

Back to Photo Library

FloGuard technology supplements the robust, field-proven features and benefits of the Hunter Pro-Spray® family with an additional level of water savings. When the nozzle is removed from the head of a Pro-Spray model with FloGuard, a single 10' tall indicator stream will clearly signal the need for maintenance, and flow will be reduced to less than 0.5 GPM. FloGuard is available in pressure-regulated Pro-Spray models with check valve (factory-installed option only). Additionally, the spacer in the directional flush plug allows for full system flushing, even with the FloGuard feature.


With the Pro-C controller in production for 17 years, we have continueously made upgrades to accommadate the innovative features.  Below you will find every panel we manufactured for the Pro-C model including the NEW wifi replacement front panel.

For information on replacing the front panel, click here.

Hunter makes our products and replacement parts available through our network of authorized distributors. 


Selecting Specific Days of the Week to Water


Owner’s manual, installation, and programming instructions for Wireless Valve Controller and Programmer is available in a downloadable PDF format.


Before securing the controller to the wall, you must first remove the lower wiring compartment door. The door can easily be removed by following the simple steps below:

  1. Open the external door using the included key if outdoor version model. Indoor version will have no external door.
  2. The lower wiring compartment door can now be removed by pushing downward. See illustration below:





We recommend that a qualified licensed contractor perform this type of winterization method. The blowout method utilizes an air compressor with a cubic foot per minute (CFM) rating of 80-100 for any mainline of 2" or less. The compressor is attached to the mainline via a quick coupler, hose bib, or other type connection, which is located beyond the backflow device. Compressed air should not be blown through any backflow or flow meter device. For additional winterization procedures, we highly recommend contacting the local dealer for the most common local practices.


Hunter warrants the battery life of the Wireless Rain-Clik (WR-CLIK) and Wireless Solar Sync sensors (WSS) for 10 years (For more infomation on the WRC/WR-CLIK warranty, see below). If a defect in a Hunter product is discovered during the applicable warranty period, Hunter will repair or replace, at its option, the product or the defective part.


Prior to the installation of the wall mount controller, it is recommended to remove the front door and face frame following the procedure below:

Tools required include: Drill with ¼"  bit (masonry or wood), level, and included bag/wirenuts with anchors.

Removing the Front Door Frame:


Si vous voulez effacer la mémoire de votre programmateur et recommencer à zéro, ou si votre programmateur ne répond plus à vos commandes, vous pouvez réinitialiser le X-Core.

X-CORE Reset