Golf - Page 2

NOTE: Complete this section only if you have a pump start relay installed. A pump start relay is a device that uses a signal from the controller to actuate a separate electrical circuit to energize a pump to provide water to your system.

The controller should be mounted at least a 15 ft (4.5 m) away from both the pump start relay and pump to minimize any potential electrical interference.

Metric

NOTE: Complete this section only if you have a master valve installed in your irrigation system. A master valve is a “normally closed” valve installed at the supply point of the main line that opens only when the controller initiates a watering program.  Whenever one of the irrigation zone valves is told to open by the controller, the controller also signals the master valve to open. The purpose of the master valve is to shut off the water to the irrigation system when none of the zone valves are operating. 

Metric

Below is a chart indicating the maximum wire runs that can be used when installing Hunter AC solenoids and valves.

Metric
Image: 
Title:
no-bounce_turf_cup_kit_003.jpg
File:
no-bounce_turf_cup_kit_003.jpg
Classification:
Products:
Keywords:
product, Golf, Studio, part, rotor, TTS-800, no-bounce turf cup kit, 987100SP
Download Image
533x800 (72dpi) 150 KB
3793x5690 (300dpi) 5 MB
By clicking download, you agree to our terms and conditions

PHOTO USAGE DISCLAIMER

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: Photo courtesy of Hunter Industries Incorporated.

Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers’ products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you need to send a copy of your intended use to creative@hunterindustries.com 
Hunter must approve the design prior to final production.

Close
Back to Photo Library
Image: 
Title:
low-bounce_rubber_cover_kit...
File:
low-bounce_rubber_cover_kit...
Classification:
Products:
Keywords:
product, Golf, Studio, part, rotor, TTS-800, low-bounce rubber cover kit, 987200SP
Download Image
533x800 (72dpi) 184 KB
3840x5760 (300dpi) 5 MB
By clicking download, you agree to our terms and conditions

PHOTO USAGE DISCLAIMER

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: Photo courtesy of Hunter Industries Incorporated.

Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers’ products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you need to send a copy of your intended use to creative@hunterindustries.com 
Hunter must approve the design prior to final production.

Close
Back to Photo Library
Image: 
Title:
low-bounce_rubber_cover_kit...
File:
low-bounce_rubber_cover_kit...
Classification:
Products:
Keywords:
product, Golf, Studio, part, rotor, TTS-800, low-bounce rubber cover kit, 987200SP
Download Image
533x800 (72dpi) 167 KB
3840x5760 (300dpi) 5 MB
By clicking download, you agree to our terms and conditions

PHOTO USAGE DISCLAIMER

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: Photo courtesy of Hunter Industries Incorporated.

Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers’ products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you need to send a copy of your intended use to creative@hunterindustries.com 
Hunter must approve the design prior to final production.

Close
Back to Photo Library
Image: 
Title:
no-bounce_turf_cup_kit_002.jpg
File:
no-bounce_turf_cup_kit_002.jpg
Classification:
Products:
Keywords:
product, Golf, Studio, part, rotor, TTS-800, no-bounce turf cup kit, 987100SP
Download Image
800x533 (72dpi) 134 KB
5674x3783 (300dpi) 5 MB
By clicking download, you agree to our terms and conditions

PHOTO USAGE DISCLAIMER

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: Photo courtesy of Hunter Industries Incorporated.

Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers’ products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you need to send a copy of your intended use to creative@hunterindustries.com 
Hunter must approve the design prior to final production.

Close
Back to Photo Library
Image: 
Title:
no-bounce_turf_cup_kit_001.jpg
File:
no-bounce_turf_cup_kit_001.jpg
Classification:
Products:
Keywords:
product, Golf, Studio, part, rotor, TTS-800, no-bounce turf cup kit, 987100SP
Download Image
800x533 (72dpi) 47 KB
5674x3783 (300dpi) 6 MB
By clicking download, you agree to our terms and conditions

PHOTO USAGE DISCLAIMER

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: Photo courtesy of Hunter Industries Incorporated.

Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers’ products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you need to send a copy of your intended use to creative@hunterindustries.com 
Hunter must approve the design prior to final production.

Close
Back to Photo Library
Image: 
Title:
low-bounce_rubber_cover_kit...
File:
low-bounce_rubber_cover_kit...
Classification:
Products:
Keywords:
product, Golf, Studio, part, rotor, TTS-800, low-bounce rubber cover kit, 987200SP
Download Image
800x533 (72dpi) 166 KB
5605x3737 (300dpi) 4 MB
By clicking download, you agree to our terms and conditions

PHOTO USAGE DISCLAIMER

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: Photo courtesy of Hunter Industries Incorporated.

Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers’ products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you need to send a copy of your intended use to creative@hunterindustries.com 
Hunter must approve the design prior to final production.

Close
Back to Photo Library

MANUAL OPERATION will allow you to turn on the following without changing any of the automatic settings.

Existing program (A, B or C) - This allows you to turn on a program that has set run times and stations automatically programmed.

Single station - This will allow you to turn on any single zone from 1 second to 12 hours.

All stations - This will allow you to turn all station on one after another for a chosen run time.

USA

Pages