Troubleshooting an Irrigation Valve That Won't Turn Off
An irrigation valve that won’t close can quickly cause major problems like overwatering, flooding, runoff to adjacent properties, and water waste. It’s
Troubleshooting an Irrigation Valve That Won't Turn On
Irrigation valves are complex products that can be intimidating to install and maintain. When a valve isn’t turning on as expected, it’s a concern for
Hands-on valve parts ID and reassembly PGV-101, PGV-151, ICV-201
In this video, we’ll identify the parts that make up three of Hunter’s most popular irrigation valves — and then reassemble each one to better
Hunter ST-1600 Rotor Maintenance
When taken out of the box, the Hunter ST-1600 Rotor will be able to make a complete 180-degree sweep in 80 seconds at 90 PSI (6.2 bar; 620 kPa). In this
Synthetic Turf Irrigation ST-1600-KIT Installation and Assembly
In this video, we’ll show you how to assemble and install a Hunter ST-1600 Synthetic Turf Irrigation Kit. This all-in-one irrigation system is designed
Clik-Delay Product Guide
The Hunter Clik-Delay was developed in response to the California Governor's mandate for a 48 hour irrigation delay after a rain event occurs. The Clik
Rain Sensors - FAQs
If your controller is showing a message indicating that the sensor is active even thought it has not rained or if the sensor is not shutting down the
Wireless Rain Clik - FAQs
If your wireless sensor is not shutting down irrigation when it rains or if the Sensor Status LED on the receiver continues to be red after the sensor
