Troubleshooting an Irrigation Valve That Won't Turn Off
An irrigation valve that won’t close can quickly cause major problems like overwatering, flooding, runoff to adjacent properties, and water waste. It’s
Troubleshooting an Irrigation Valve That Won't Turn On
Irrigation valves are complex products that can be intimidating to install and maintain. When a valve isn’t turning on as expected, it’s a concern for
Hands-on valve parts ID and reassembly PGV-101, PGV-151, ICV-201
In this video, we’ll identify the parts that make up three of Hunter’s most popular irrigation valves — and then reassemble each one to better
Canceling Extra Start Times on Hunter Controller
An irrigation system that is repeating the cycle and continuously watering most likely has too many start times programmed into the controller. This
Programming Odd & Even Days and Programming Interval Watering
This video will teach you how to program your controller to water every other day by selecting odd or even days of the week to water. You will also
Canceling a Delay on a Hunter Controller
One of the most common reasons for a sprinkler system to water intermittently and show the word DELAY on the display is because a delay time was
How to Reset a Hunter Controller
If want to clear the memory on your controller and start from fresh or if your controller is not responding to your commands, this video will show you
Controllers - Programming Multiple Programs Part 1 of 4: Introduction, Time/Date
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 2 of 4: Program A
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 3 of 4: Program B
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 4 of 4: Other Modes
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
