The X2 allows the user a simplified method for running a test program. This feature operates each station in numerical sequence, from the lowest to the highest. You can start with any station. This is a great feature to check the operation of your irrigation system.
To initiate the test program:
- With the dial in the RUN position, press and hold the PRG button. The station number will be displayed and the time will be flashing.
- Quickly use the plus (+) or minus (-) buttons to set the run time from 1 to 15 minutes. The run time needs to be entered only once.
- After a 2 second pause, the test program will begin and run every zone with this same run time.