ST-1600-Kit - Product Details

  1. Hunter ST-243636-B composite vault and four–piece polymer–concrete cover set with cast–in openings to support rotor lateral thrust plus cast-in opening with circular covers for quick coupler and on–off–auto access
  2. Synthetic turf or running track material attached to vault rim and cover set (optional)
  3. 2" x 4" (5 cm x 10 cm) tack/glue board or as per specification of all sides
  4. Finished grade set to field perimeter track/glue board or as per specification
  5. Hunter ST-V30-KV ultra low loss 3" (80 mm) valve kit with grooved fitting connections
  6. Remote on–off–auto selector and solenoid manifold assembly mounted on vault sidewall
  7. Color-coded control tubing from ST-V30-KV valve to selector switch mounted on vault side wall
  8. Lead wires from solenoid to waterproof splice connectors
  9. Hunter STBVF30K isolation valve and fitting kit with grooved connections and 500 PSI (35 bar; 3,500 kPa) rated couplings sufficient to connect rotor and control valve to manifold inlet
  10. Hunter STSPTK adjustable manifold support block adjusted to support manifold weight (2)
  11. 16" x 16" x 2" (40 cm x 40 cm x 5 cm) support pad or concrete stepping stone as per specification (2)
  12. Hunter HQ5RC quick coupling valve set directly below circular quick–access port
  13. Hunter STH30K 3" (80 mm) stainless steel flexible inlet pipe
  14. 1" (25 mm) minimum Schedule 80 quick coupler supply piping and fittings or as per specification
  15. ⅝" x 48" (15 mm x 122 cm) rebar stake with stainless steel strapping
  16. Compacted base field materials per specification
  17. Brass manual ball valve included/provided with #9 ST-VBF30-K
  18. Provide drainage via access to field drainage system
  19. Waterproof connections per specifications between control wire and solenoid lead wires
  20. Top of quick coupler set less than 1/ 2" (13 mm) below underside of main vault cover to allow key activation from above
  21. Hunter ST-IBS-1600 rubber cover and infill barrier kit with trim reference rings to allow heights from standard 11/4" (32 mm infill application) to flat (non–infill or track material) applications
  22. Hunter ST-BKT-1600 rotor hanger and elevation adjustment bracket
  23. Hunter ST-1600-HS-B rotor
  24. Isolation butterfly valve with grooved connections included; provided with #9 ST-VBF30-K
  25. Wrap flexible inlet piping with heavy–duty plastic pipe wrap tape prior to backfill and compaction

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support