Support
SRC/SRC Plus Controller Support

Resetting the SRC controllers

SRC / SRC Plus
  • FAQs

Customer Type:

SRC Reset

  1. Unplug the controller's transformer and remove the battery.
  2. Press and hold down the  ,   and   buttons.
  3. Plug the controller's transformer back in.
  4. Release the  ,    and   buttons. The display should now show 12:00a.m.
  5. All the memory has been cleared and the controller may now be reprogrammed.  Reinstall the battery.

 

SRC Plus Reset

  1. Press and hold down the ,  and   buttons.
  2. Press and release the RESET button in the lower wiring compartment.
  3. Release the  ,  and  buttons. The display should now show 12:00a.m.
  4. All the memory has been cleared and the controller may now be reprogrammed. 
Rate this Article: 
3.5

Was this article helpful? Yes | No

S U P P O R T
M E N U